How an Aerobic Septic System Differs from a Traditional Model Aside from the existence of oxygen, there are some other striking differences between how the 2 models operate. With a standard design, all the wastewater from a building goes into a tank through a primary line. A lot of tanks have two compartments, though a few of the older ones have a single compartment. As the wastewater streams into the tank, it divides into 3 layers. The resilient products, such as grease and bathroom tissue, rise to the top, and the thick materials sink to the bottom. The liquid in the center is described as "effluent," which moves from one chamber to the next, and then is distributed into an underground absorption field or leach field, where the bacteria in the soil finishes cleaning it prior to it reaches the water level.
The oxygenated units begin virtually the exact same, with all the wastewater entering into a tank and separating into layers. The rest of the activity might take place in numerous independent tanks or in separate compartments of the preliminary tank, with the next stop for the effluent being an aeration area. This tank, or a part of the tank, uses an air pump to oxygenate the effluent. After this, it moves onto a chlorination area, then to a tank where it waits to be pumped. Last but not least, the units use sprinklers in a spray field to distribute the cured water, versus the leach field that a traditional unit requires. See more about septic tank installation, maintenance, and repair here -http://atlantaseptictankpros.com/